- SAF (Seismic Anchoring Fittings) These fittings have many seismic sway brace applications. The hole in the tab can accommodate our gold, orange, and green cable without a thimble and with bolt hole sizes of 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1" & 1¼". SAFs may be used as connection fittings for anchorage to structure, or as connection to braced components.
- SAFR (Seismic Anchoring Fitting Retrofit) These fittings are used in the same manner as the SAF, except that they are slotted to permit a hex nut on an existing component to be loosened, the SAFR positioned and the hex nut re-tightened. The SAFR is available for gold and orange cable. All of the bolt hole sizes from 1/4" through 5/8" are available.
- Zinc-plated oval sleeves are the fittings used to secure sizes gold, orange, green, and black seismic cable connections. Loos' Zinc-plated oval sleeves are the only acceptable method to make secure connections to Loos' Seismic Bracing Cable.
| Part Number | Size | Notes |
|---|---|---|
| SAF-1/4 | ¼" | Seismic Anchoring Fitting |
| SAF-3/8 | 3/8" | Seismic Anchoring Fitting |
| SAF-1/2 | ½" | Seismic Anchoring Fitting |
| SAF-5/8 | 5/8" | Seismic Anchoring Fitting |
| SAF-3/4 | ¾" | Seismic Anchoring Fitting |
| SAF-7/8 | 7/8" | Seismic Anchoring Fitting |
| SAF-1 | 1" | Seismic Anchoring Fitting |
| SAF-1-1/4 | 1¼" | Seismic Anchoring Fitting |
| SAFR-1/4 | ¼" | Seismic Anchoring Fitting Retrofit |
| SAFR-3/8 | 3/8" | Seismic Anchoring Fitting Retrofit |
| SAFR-1/2 | ½" | Seismic Anchoring Fitting Retrofit |
| SAFR-5/8 | 5/8" | Seismic Anchoring Fitting Retrofit |
| GO3-SLV | for Gold cable | Zinc Plated Oval Sleeve |
| OR4-SLV | for Orange cable | Zinc Plated Oval Sleeve |
| GR6-SLV | for Green cable | Zinc Plated Oval Sleeve |
| BL8-SLV | for Black cable | Zinc Plated Oval Sleeve |